Category: FWF

More plug wire routing…

Today, I worked on the Lightspeed ignition wiring. Most of the time was spent actually figuring out which lead went to which coil. This was

Yup. Back under the panel I go. I think I finally have the box mounting and wire routing how I want it. It’s still a

With pretty much everything for the Lightspeed install behind the panel done, I finished wiring the coil leads. Something happened with the video, and I

Got a few different things done today. First, I installed the cover plates that close up the holes left by removing the magnetos. I also

I started the day today by securing the alternator field wire and the block heater wires to the engine block with adel clamps. But most

Short night tonight. I finished securing the starter and alternator cables to the engine block with adel clamps, crimped ends on, put on some shrink

Another hodgepodge of tasks on the FWF. First, since the adel clamps I ordered came in, I was able to finish the last 3 spark

Tonight, I built the harness for the EGT and CHT sensors. I first measured what I would need for lengths of cable for each sensor