Good. Plane. Living.

Another hodgepodge of tasks on the FWF. First, since the adel clamps I ordered came in, I was able to finish the last 3 spark

Short night tonight. I finished securing the starter and alternator cables to the engine block with adel clamps, crimped ends on, put on some shrink

I started the day today by securing the alternator field wire and the block heater wires to the engine block with adel clamps. But most

Got a few different things done today. First, I installed the cover plates that close up the holes left by removing the magnetos. I also

With pretty much everything for the Lightspeed install behind the panel done, I finished wiring the coil leads. Something happened with the video, and I

Yup. Back under the panel I go. I think I finally have the box mounting and wire routing how I want it. It’s still a

Today, I worked on the Lightspeed ignition wiring. Most of the time was spent actually figuring out which lead went to which coil. This was

More plug wire routing…

I decided that I wanted some way to keep all my plug wires and engine sensor wires neatly separated and well supported. What I came