Good. Plane. Living.

I took a day off of work today so I could focus on getting some good work done on the plane. I’m continuing on with

So, this is one area where I’m going way overboard. I’ve designed a custom interior lighting system. Here are the highlights: Lights: 2 PlaneAround LED

Today, I got the magnetometer installed. I’m installing it using the RV10 mounting bracket that I got from Steinair. I think it’s made by Garmin.

Back into the hole I go! I had to drag myself back into the tailcone to wire tie the pitch trim wires and elt antenna

I started by test fitting the stainless steel lines I had made up from Bonaco. I had to have them cut down a bit to

Quick night tonight. I made up a twisted pair of wires for the flap motor, routed them thru the fuse, and connected them up to

I began tonight by making a doubler for the transponder antenna, just like I did for the ADSB antenna… this time in the tunnel in

I only got one thing accomplished today. I cut out all the holes for the overhead lights in the overhead console inserts. I have two

There are a few items that are going to be mounted in the tailcone behind the rear baggage bulkhead: The ELT, the GDL39-R ADSB-IN, a