Category: Fuselage

Yup. Back to sanding and filling. But the end is in sight! The high build primer has cured, and the cabin top looks really good.

I sanded down the epoxy I had applied to fill the last few pinholes. I also really wanted to see how the transition was going

After the last coat of primer, the top is to a point where I could wet sand it out and call it good… however, after

I’m done with the body work on the cabin top!!! Well, the interior, at least. I went a little heavy on the last primer coat

With the gear fairings done, I could focus back on getting the cabin top ready to be installed on the plane. Tonight I prepared and

With the clear coat from yesterday cured, it was time to work the surface down to the finish I wanted. I started by wet sanding

I’ve been having a hard time finding a paint color to match the leather that I’m going to be using in the plane. So today,

Big day today! I began by installing a few of the LED lights in the overhead console that would be harder to do once it’s