Today, I worked on the Lightspeed ignition wiring. Most of the time was spent actually figuring out which lead went to which coil. This was
Author: Ed
Wire routing
Battery Cable
Tonight, I pulled the battery cable and crimped ends on. I also untangled the big coil of static line that I had in the tailcone
Wire Guides
I decided that I wanted some way to keep all my plug wires and engine sensor wires neatly separated and well supported. What I came
LSE Sensor Wires (and some other stuff)
Today, I started by getting the sensor wire passthru installed on the left side of the firewall. My dad was able to help supervise and
Cowl Heat Shielding
Since the exhaust sits close to the cowl in a number of areas, I’m going to be installing a metallic heat shield tape to the
Measuring the Battery cable
Spent a quick 15 minutes figuring out the length and routing of the main battery cable.
Lightspeed Mounts
I started the day out by securing the tailcone conduit in the lightening holes. Next, the lightspeed ignition system I’m using has a control box
Measuring for fluid lines and plug wires
I choose not to get any of the stock FWF fluid lines with my kit, and instead I’m going to have a full set custom
This and that…
I’m pretty much done with the oil door now. I finished up the last of the sanding, got the latches installed, and added some little