I started the day out by securing the tailcone conduit in the lightening holes.
Next, the lightspeed ignition system I’m using has a control box (a pair of them, actually) that needs to be mounted somewhere inside the plane. I’m mounting them in between the firewall and the sub-panel on the right side of the plane. They are going to be supported by a pair of pieces of aluminum angle that is going to get bolted to the ribs. It’s not the most accessible place, but it’s really the only place that’s going to work. Plus, hopefully, once the boxes are installed, the shouldn’t need to come out again! (knock on wood)
I ended the day by installing the first of two firewall passthrus. This passthru on the right side is going to be for all my power wires, like the Lightspeed coil leads, cowl flap wires, and alternator field wires. The other passthru will be installed on the left side, and will be used for all the sensor wires.
