I have a few miscellaneous items to finish up from previous sections. The first one I worked on today was to rivet together the front
Category: Fuselage
More misc fuse work
I finished up the front seat pans that I started the other day, and then I finished this work session by riveting together and installing
Beginning Brake Lines
Today I started running brake lines in the fuselage. I started by installing some 45 degree fittings that pass thru the gear leg mount and
Fuel valve mount
Since I’m still waiting on the thread sealant to continue work on the brake lines, I took tonight to make a mount for my fuel
Brake lines done, for now
I’ve finished the interior brake hard lines. I started by checking torque on the fittings I did last night. Then I fastened the longer lines
Fuel System Figuring
Seeing as I’m using an aftermarket fuel pump and fuel selector, I am on my own to figure out where everything is placed and how
Control systems work
It’s time to begin fabbing up the main flight controls. I began by cutting pushrods to length and match drilling in the pushrod endcaps. I
Fuel Pump Mount Fabrication
So the last time I worked on the fuel system, I did a lot of pondering. This time, I actually did the work. The EFII
Misc priming
Got a bunch of misc parts primed, including the fuel pump mounts, fuel selector mount, and the control pushrods.
Bending tubes
Today was my first real foray into the world of tubing bending. The fuel system in the RV10 uses 3/8 aluminum tubing that needs comes