Category: Cabin Top

With the clear coat from yesterday cured, it was time to work the surface down to the finish I wanted. I started by wet sanding

I’ve been having a hard time finding a paint color to match the leather that I’m going to be using in the plane. So today,

Big day today! I began by installing a few of the LED lights in the overhead console that would be harder to do once it’s

Started off with some more work on the door gutters. Afterwards, I did a little final shaping on the door windows, then bolted the windows

As the title says, I finished up the work on the door “gutters”. They are to a point where they could be primed and look

More work on smoothing out the transition between the cabin top below the door opening and the fuselage door sill. Filling and sanding. Filling and

More sanding work on the door sills. I also masked off the pilots side windows again (I wasn’t happy with how they were done before),

Today was the final bit of interior bodywork in preparation for primer. I finishes masking off everything inside, and I finished sanding down all the

I was able to get the interior primed, and today I did the prep for the final paint.

I think the end is in sight for the cabin top body work! Just a little more sanding and filler tonight.