Today I fit the lens for the right wing tip. It’s funny how much faster everything is the second time you do it. With the
Lens fitting and AOA install
Duckworks, part 4
Just a little time to work on the plane tonight, but I was able to get both top and bottom brackets for the landing light
Duckworks landing lights, part 3
Tonight was a continuation of the installation of the Duckworks leading edge landing light kit. On the wing I started on last night, I got
Duckworks landing lights, Continued
More working on the landing light mounts tonight. I got the mounting plate and associated brackets measured, cut up, and clecoed together. I also got
Cutting holes
So now that I have my nice shiny leading edge sections built, what is the next step? Cut big gaping holes into the front of
….and a little of that.
Yup. Two posts in dedicated to the same day. I’m breaking today into two posts because I worked on two totally different sections of the
A little of this…
Got the left leading edge assembly fully riveted up. The next step in the plans is to rivet the leading edges to the spar and
Just a quickie
I had a very busy night, but I still wanted to get SOME progress made in the riveting… so I busted out a quick half
Leading edge riveting, part 2
I made some good progress tonight. I got the right leading edge section fully riveted, and a good start on the left leading edge.
Riveting again
With the primer fully cured, I started final assembly of the leading edges. Tonight I was able to get one leading edge clecoed together and