Got the Aerosport handle installed in the left door tonight.
Wing bottom skin, 2
Quick night tonight, finished riveting the inboard lower wing panel to the left wing.
More door handles
Spent a little more time working on the door handle installation…
Aerosport Low Profile Door Handles
Tonight, I started installing the Aerosport Products Low Profile Handles. These replace the triangle shaped block of aluminum that Van’s gives you for door handles
Bottom Wing Skins
Big change of pace here. I decided to finally bite the bullet and get the wing bottom skins installed. I couldn’t think of any more
Rear Heat SCAT
I installed the rear heat SCAT tube. Again, I needed to come up with some custom supports because of the control approach pedals. The rudder
Tunnel work
Started the night by reinstalling the fuel pump. This should be the last time that it needs to get bolted in! Once that was in
This and that
Got a bunch of different things done tonight. First, I started by connecting up the wiring to the Redcube fuel flow sensor. I had the
Wing wiring
Just finishing up some last things in preparation for riveting on the wing bottom skins. I had built some small grounding blocks for local grounding
500th Video!!!
Unfortunately, I really didn’t do anything earth shatteringly interesting. I just reinstalled the landing lights into the freshly painted black Duckworks mounts and screwed them