Good. Plane. Living.

The center tunnel of the RV10 is a crowded space. It’s more than just a place to set your elbow. It houses one of the

I do like dimpling much more than deburring…

My favorite… deburring! Tonight’s parts on the deburring table were the floor ribs, fuel pump brackets, and fuse bottom skins!

That’s the theme of the day today. All those big parts I’ve been putting together have to get taken apart to be deburred, counter sunk,

The front spar got (temporarily) bolted in place to be match drilled with the center tunnel, and then the front fuse section an the rear

I started tonight by match drilling the control column mount to the front seat bulkhead. Then I moved on to the front bottom skin. This

Tonight, I worked on the front bulkheads. These are actually the structure that makes up the front support for the pilot and copilot’s seats. It

The instructions called for some parts to be primed at this point, so I primed them!      

Tonight marks the beginning of another section of the plans: Forward Fuselage Ribs, Bulkheads, and Bottom Skin.   Tonight, I mostly worked on deburring and