Good. Plane. Living.

I spent a few minutes finishing the little seat brackets that mount to the top of the landing gear mounts, then the rest of the

Tonight, I got everything fabbed up for the front seat access panels. Pretty straight forward assembly, but you have to be careful to make a

Tonight finished up what was started the last time. I finished bolting the front seat bulkhead parts together, and bolted the control column bracket in

Tonight, I riveted together all the parts of the tunnel access panels and finished their installation. I also began bolting together the front seat bulkhead

Big night tonight! The front and rear halves of the fuselage are now a single piece! To reach this occasion, I started by bolting and

Tonight, the firewall/tunnel assembly got riveted to the bottom skin assemble. Everything lined up as it should, and riveting went smoothly thanks to the professional

Everything is getting assembled just like last time, except this time, with rivets! I started with the front seat bulkhead parts, then moved on to

Priming day. Nothing to see here. Move along!

Same thing as yesterday, except with the pilots side. I had the camera in a better position today, so you can really see how it