Today, I installed the Aerosport Products Engine Mount Covers. There are actually two videos for this session. One explaining the covers and how I installed
Category: RV10 Build
Exhaust and oil cooler
Cowling Body Work
Working on getting the cowling looking all smooth and pretty!
Cowl sanding
Just sanding down the filler I added yesterday…
Alternator, Baffles, Oil Breather
Started by installing the alternator. Pretty straight forward. Then I installed the baffles for what I hope is the last time. Next, I installed the
Aerosport Hinge Pin Covers
Completed the first part of installing the Aerosport Products Hinge Pin Covers.
Lightspeed Coil Mount Plate
I’m working on building a mounting plate to hold the 6 lightspeed coils. I’m planning on a plate that is mounted to the engine mount
Backup alternator and engine block heater
Today, I installed the PlanePower 30amp backup alternator. This alt is mounted to the vacuum drive mount on the back of the engine, and should
Aerosport Pin Covers finishing / body work
Finished up the last few steps to installing the Aerosport pin covers. Nothing to it! I also added a little more body filler to a
Cowl sanding and sealing
I started tonight by sanding down the filler I added yesterday. Then I did a quick sand of the cowl interior, cleaned it up, and
