Author: Ed

Ok. Black death might be a bit melodramatic, but Proseal can be a sticky mess. Cory came over today and helped me with the fuel

Got the tank skins dimpled tonight. I dimpled all the holes I could reach with the pneumatic squeezer the other day, but the majority of

Got started on dimpling the tank parts tonight. I actually made pretty good progress, as I got all the non skin parts dimpled, and the

Long day, short post. I got all the holes in all the fuel tank parts deburred. 9 hours worth. Days like this make the TV

Using the first capacitive plate as a template for the remaining ones, I got everything cut to shape and riveted to it’s mounting hardware. All

There are two options for fuel level sensors that I looked at for my -10. First is the standard float type sensor. It’s basically a

Tonight I got the rear baffles in place, match drilled, and countersunk. These are counter sunk as opposed to dimpled to make it easier to

After seeing what the standard fuel caps that Van’s includes in the kit, and because I want to keep strangers from messing with my fuel

Today marked the first day of actual construction progress on the fuel tanks. I began by clecoing the ribs into the skin. This is much

The fuel tanks begin just like most other sections… with a whole lot of edge deburring! There were also some stiffeners and brackets to cut