More work on smoothing out the transition between the cabin top below the door opening and the fuselage door sill. Filling and sanding. Filling and
Author: Ed
Window masking, Door sills
Now that the windows are installed, and I’ve removed the protective outer film, I had to mask them off. I’m going to be covering the
Last side window installed
Finishing up from my work yesterday, I bonded the remaining side window in place. I also pulled the protective finish off of the other windows
Window install
Big day today! We’re installing the side windows! I began by finishing roughing up the window flanges and shimming out the passenger side windows with
Finished gutters, started window install
As the title says, I finished up the work on the door “gutters”. They are to a point where they could be primed and look
Gutters, Windows, and Doors
Started off with some more work on the door gutters. Afterwards, I did a little final shaping on the door windows, then bolted the windows
Down in the gutters
Mostly more work on the door gutters today. Filling and sanding. I ended by adding a little more filler to the tops of the doors
Gaps and fill and EJ’s first flight!
Happy 4th of July! I’m celebrating by continuing the door fitting. The pilots side of the cabin top had a few lower spots around the
Doors
More work on the pilots side door fit, and some sanding and more filling on the passengers side door gutters.
Another door session
I’ve really been itching to make some good progress on the plane, so I took today off from work! The first few hours of my