I got the GPS Antenna coax wires pulled tonight. It was a bit of a pain in the ass to pull 3 RG400 cables up thru the windshield centerpost, but I was able to get them to fit, and then ran them back to the tailcone thru the Aerosport overhead. The three wires are for the G3X GPS antenna, the G3X XM Antenna, and the GTN-650 GPS Antenna. The 650 and XM are actually built into a single antenna with two jacks on it. There will be a 3rd GPS antenna integral to whatever I decide to use for a backup EFIS, but I’ll cross that bridge when I get to it.
I also pulled the rough wiring and AOA tubing in the left wing. After that, I wired up the connector for the Garmin AP servo.
