Rib riveting

Hours Worked = 3

With everything nicely primed, I started riveting together my pile of parts.

First up was riveting in place the seat belt brackets and heat vents, followed by the vertical ribs that attach to the outer footwell ribs. Then they were riveted to the rear spar carry-thru.

[pe2-image src=”http://lh3.ggpht.com/-WeR0RHs5g0g/UTa4Zf3LNzI/AAAAAAAAJKM/obs8DU97V-c/s144-c/P1020238.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067514003699506″ caption=”” type=”image” alt=”P1020238.JPG” ]

[pe2-image src=”http://lh5.ggpht.com/-2sQva_8Ugi0/UTa4csfAhdI/AAAAAAAAJKU/qR4OjI9hgFA/s144-c/P1020239.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067568931603922″ caption=”” type=”image” alt=”P1020239.JPG” ]

[pe2-image src=”http://lh4.ggpht.com/-k2yfxsibofY/UTa4fkj_hiI/AAAAAAAAJKc/-zyDbBAWP4o/s144-c/P1020240.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067618344633890″ caption=”” type=”image” alt=”P1020240.JPG” ]

[pe2-image src=”http://lh6.ggpht.com/-6zhFr7NWy7s/UTa4i2RQVaI/AAAAAAAAJKk/0kVg6amN9nI/s144-c/P1020241.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067674637489570″ caption=”” type=”image” alt=”P1020241.JPG” ]

[pe2-image src=”http://lh4.ggpht.com/-fpd6wBvXkl4/UTa4mJohgNI/AAAAAAAAJKs/dnOOnjI1e34/s144-c/P1020242.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067731374964946″ caption=”” type=”image” alt=”P1020242.JPG” ]

[pe2-image src=”http://lh3.ggpht.com/-GsGupfyoQ-A/UTa4pamPyZI/AAAAAAAAJK0/4dngDwlnpsE/s144-c/P1020243.JPG” href=”https://picasaweb.google.com/104915858356518723094/RV104Fuselage#5852067787468425618″ caption=”” type=”image” alt=”P1020243.JPG” ]

Leave a Reply

Your email address will not be published. Required fields are marked *