Fun with foam and fiberglass

Hours Worked = .75

Just a quick night tonight.

I formed some plugs for the HS tips. These plugs are just to give form to the fiberglass sheet that caps the tip off. I cut and sanded the plugs to fit, then taped over them with some packaging tape to allow the fiberglass to release when the plug is removed. Then I laid up a layer of fiberglass cloth on top of the plug.

Once the fiberglass cures, I’ll remove the plug and lay up additional layers from the inside.

P1010792.JPG P1010793.JPG P1010794.JPG P1010795.JPG

Leave a Reply

Your email address will not be published. Required fields are marked *